• Crochet Patterns

    The Aeipathy Beanie

    Woman wearing sunglasses wearing a purple Aeipathy Beanie
    All opinions are my own. This page may contain affiliate links.

    The Aeipathy Beanie is a crochet hat pattern that combines two of my favourite stitches: Bobble Stitch and Camel Stitch. I also love the colour purple. So when it was time to come up with a name, The Aeipathy Beanie seemed appropriate since Aeipathy means “a continued passion” and I definitely have a continued passion for textured stitches and crochet in general.

    To make this hat, I used Lion Brand Heartland yarn in Hot Springs which is a size 4 aran weight yarn. Some great yarns that you could use as substitute for the Heartland yarn are: Lion Brand Vanna’s Choice, Caron One Pound and Red Heart With Love yarn. Ultimately, as long as you match gauge, you can use another medium weight, size 4 yarn that isn’t in the list suggested above.

    free crochet hat pattern for The Aeipathy Beanie by The Loopy Lamb

    I like to top my crochet hats with a faux fur pompom but that step is optional. If you want to take a hand at making your own DIY faux fur pom pom, this tutorial from Heart Hook Home is really helpful. I’ve used the same process described in the tutorial to make my own pom poms with success. However, time is often limited so I generally use THESE pompoms from Amazon.

    Save it for later on Pinterest HERE.

    To make this crochet hat, you’ll need to know how to crochet in the third loop of a stitch (aka camel stitch), single crochet, half double crochet, double crochet and how to make a magic circle.

    free crochet hat pattern for The Aeipathy Beanie by The Loopy Lamb

    Aeipathy Beanie – Free Crochet Hat Pattern

    Skill Level: Intermediate

    Supplies:

    5.5 mm crochet hook
    3.8oz/109 yards of Lion Brand Heartland Yarn in Hot Springs
    Tapestry Needle
    Faux Fur Pom Pom (optional)

    Abbreviations:

    CH = Chain
    ST = Stitch
    SL ST = Slip Stitch
    SC = Single Crochet
    HDC = Half Double Crochet
    HDCINC = Half Double Crochet Increase
    DC = Double Crochet
    DC Increase = Double Crochet Increase
    Bobble = Bobble Stitch (see Special Stitches for instructions for this stitch)
    MC = Magic Circle
    FO = Finish Off

    Get an ad-free PDF version of this pattern HERE on Ravelry or HERE on Etsy.

    girl wearing The Aeipathy Beanie made with the free crochet pattern from The Loopy Lamb

    Size: One Size – Adult
    Finished size: Approximately 8.5 inches tall x 10 inches wide.

    Gauge: 17 HDC sts across x 12 rows = 4” square

    NOTES:

    – On the bobble stitch rows, the hat is worked with the wrong side facing you so that the bobble stitches will push out to the right side of the work.
    – Join indicates that you should join the last stitch of the round to the top of the first stitch of the round with a slip stitch.
    – CH 2 at the beginning of DC rounds counts as a stitch.

    Special Stitches:

    Bobble Stitch – The Bobble Stitch is essentially a Double Crochet five together cluster (DC5TOG).  To complete it: Yarn over (YO) and insert hook into indicated stitch.  YO and draw up a loop.  YO and pull through two loops on your hook. (Two loops remaining on hook). (YO and insert hook back into the same stitch, YO and pull up a loop.  YO and pull through two loops on your hook).  Repeat instructions in brackets until you have 6 loops on your hook.  YO and pull through all 6 loops on your hook.

    Pattern

    Row 1: Make a MC. CH 2 and DC 11 into the MC. Join to the top of the first DC with a slip stitch. From here on referred to as “Join”. (12)
    Row 2: CH 2. DC in the first stitch, DCINC in the next 11 stitches. Join.  CH 2 and turn (24)
    Row 3: (Bobble in the first stitch, SC in the next stitch).  Repeat instructions in brackets 12 times. Join.  CH 2 and turn. (24)
    Row 4: (HDCINC in the first stitch, HDC 1 in the next stitch).  Repeat instructions in brackets 12 times. Join and CH 2. (36)
    Row 5: In 3rd loop, HDC 1 in the first stitch, HDCINC in the next stitch, (HDC 2, HDCINC) repeat this pattern 11 times, HDC 1 in the last stitch.  Join and CH 2 (48)
    Row 6: In 3rd loop, (HDC in the first 3 stitches, HDCINC in the next) x 12.  Join and CH 2 (60)
    Row 7: HDC in the first 2 stitches, HDCINC in the next. (HDC in the next 4 stitches, HDCINC in the next) x 11, HDC in the last 2 stitches. Join and CH 2 (72)

    If you would like to support my blog, you can do so by doing your regular shopping on Amazon. As an Amazon affiliate, I earn a small commission on qualifying purchases made through my Amazon link, which in turn helps to support the blog so I can keep bringing you patterns and great content like this for free.

    The Aeipathy Beanie with handmade wooden crochet hook and scissors laid on top

    Row 8: In 3rd loop, (HDC in the first 5 stitches, HDCINC in the next) x 12.  Join.  CH 2 and turn. (84)
    Row 9: (Bobble in the first stitch, SC in the next 2 stitches) x 28.  Join.  CH 2 and turn (84)
    Row 10: HDC in each stitch around.  Join. CH 2.  (84)
    Rows 11 – 12: In 3rd loop, HDC in each stitch around.  Join. CH 2. (84)
    Row 13: HDC in each stitch around.  Join. CH 2. (84)
    Row 14: In 3rd loop, HDC in each stitch around.  Join.  CH 2 and turn (84)
    Row 15: (Bobble in the first stitch, SC in the next 2 stitches) x 28.  Join.  CH 2 and turn (84)
    Row 16: HDC in each stitch around.  Join.  CH 2 (84)
    Rows 17 – 18: In 3rd loop, HDC in each stitch around.  Join.  CH 2 and turn. (84)

    girl acting silly wearing The Aeipathy Beanie, a crochet hat pattern from The Loopy Lamb


    Row 19: HDC in each stitch around.  Join.  CH 2 (84)
    Row 20: In 3rd loop, HDC in each stitch around.  Join.  CH 2 and turn (84)
    Row 21: (Bobble in the first stitch, SC in the next 2 stitches) x 28.  Join. CH 2 and turn. (84)
    Row 22: HDC in each stitch around.  Join.  CH 2 and turn. (84)
    Rows 23 – 24: In 3rd loop, HDC in each stitch around.  Join.  CH 2. (84)
    Row 25: Repeat Row 22. (84)
    Rows 26 – 28: Repeat Row 23. (84)
    FO and weave in ends. If using pompom, secure to the top of the hat using your preferred method.

    Disclaimer:

    Feel free to sell the item created by this pattern but please provide pattern credit back to me when posting online, and please provide a link to my Etsy Shop: www.etsy.com/ca/shop/theloopylamb.  Please do not resell, distribute, duplicate, or share this pattern in any printed or digital form, claiming this pattern as your own original design.  Please do not use my photos when selling your finished items.   

    I’d love to see your finished items!  Please share your finished makes by tagging the pattern on Ravelry, sharing it to our Facebook page or Instagram.  Don’t forget to follow me on Facebook, Instagram and Pinterest 

    Facebook: www.facebook.com/TheLoopyLamb
    Instagram:
      www.instagram.com/TheLoopyLamb
    Pinterest: www.pinterest.com/theloopylamb
    Newsletter: Sign up for my newsletter!

    Like to make crochet hats? Check out my free crochet hat patterns for the Arctic Gem Beanie and the Polar Puff Messy Bun Hat.

    The Aeipathy Beanie - a free crochet hat pattern from The Loopy Lamb.

This highly textured beanie is comprised of simple crochet stitches and is a quick and easy crochet pattern, accessible for beginners.

#crochethat #crochetbeanie #bobblestitch #beanie #freecrochetpattern #crochetpatternfree #freehatpattern #freecrochethatpattern #freepattern
  • Crochet Patterns

    The Bobblelicious Bag – Free Crochet Pattern

    The Bobblelicious Bag: a round crochet purse with a chain style strap comprised of chunky bobble stitches
    This is an unsponsored post. All opinions are my own. This post may contain affiliate links.

    The Bobblelicious Bag is a fun crochet circle bag that is made of super chunky bobble stitches. Once it is assembled, it kind of looks like a pillbox bag. The chain style strap gives it a professional touch that will make your friends wonder “where did she buy that bag?”.

    The Bobblelicious Bag is crocheted by holding two strands of Cascade Yarns Sarasota Chunky Yarn together. Sarasota Chunky is a cotton/acrylic (60%/40%) mix size 5 yarn. It’s machine washable and dryable (yay!) and it comes in a variety of colours. (www.cascadeyarns.com) I really enjoyed working with this yarn for this project.

    Woman wearing a gray bobblelicious crochet bag made with this crochet pattern

    I decided to take my hand at lining this bag and I am so glad that I did. It is one of my favourite parts of this bag. I picked a cotton fabric in a vibrant teal colour to line my bag. So although the outside of my bag may be a subtle silver/grey colour, there’s that beautiful pop of colour when you open it. I can’t wait to see what colour combos you all come up with when you’re making your Bobblelicious Bags!

    Wooden crochet hook being placed inside the Bobblelicious Crochet Bag

    Skill Level: Intermediate

    Supplies:

    • 10 mm hook
    • Approximately 1 ball** (6.9 oz/195g) of Sarasota Chunky Yarn in Silver (Colour No. 222) **See Note section regard the potential need for a second skein.
    • Tapestry Needle
    • Stitch Marker
    • 9″ Zipper in a coordinating colour
    • 51” Purse Strap – I got mine HERE.  It came with the tassel that I attached to the zipper
    • 2 – 1” wide triangle rings for making detachable straps (I used these HERE)
    • 0.25 meters of heavy weight fusible interfacing (this is the amount that I used, I recommend ordering a bit more to be sure you have enough)
    • 0.25 meters of fabric (I used cotton) in your preferred colour for lining the inside of your bag (this is the amount that I used, I recommend ordering a bit more to be sure you have enough)
    • Sewing Needle
    • Iron
    • Sewing thread that matches the colour of your bag
    • Sewing Machine for lining your bag
    • Fabric marker/pencil or something to mark your fabric with
    • Fabric Scissors
    • Sewing Pins

    Get a copy of the inexpensive ad-free PDF HERE on Ravelry and HERE on Etsy.

    Abbreviations:

    • CH = Chain
    • ST = Stitch
    • SL ST = Slip Stitch
    • SC = Single Crochet
    • DC = Double Crochet
    • MC = Magic Circle
    • FO = Finish Off
    • Bobble = Bobble Stich

    Special Stitches: Bobble Stitch – The Bobble Stitch is essentially a Double Crochet five together cluster (DC5TOG).  To complete it: Yarn over (YO) and insert hook into indicated stitch.  YO and draw up a loop.  YO and pull through two loops on your hook. (Two loops remaining on hook). (YO and insert hook back into the same stitch, YO and pull up a loop.  YO and pull through two loops on your hook).  Repeat instructions in brackets until you have 6 loops on your hook.  YO and pull through all 6 loops on your hook.

    Size: One Size
    Finished size: Approximately 9 inches tall x 9 inches wide x 3” deep. Measurements do not include strap

    Gauge: 7 sts across x 5.5 rows = 4” square

    Pin in for later: HERE


    NOTES:

    • This bag is made out of two different panels that are worked in the round and then sewn together.  The end of each round is joined with a sl st.
    • This bag is made holding two strands of yarn together.  You can use one skein of yarn and pull from both ends of the skein or get two skeins and pull from the center of each skein.

    Panels (Make 2)

    Row 1: Holding 2 strands of Sarasota chunky yarn together, make a MC and SC 6 into the MC.  Join with a sl st to first stitch. CH 1. (6)
    Row 2: *SC 1, Bobble* in each stitch around.  Join with a sl st to first stitch. CH 1. (12)
    Row 3: (SCINC) x 12. Join with a sl st to first stitch. CH 1. (24)
    Row 4: (Bobble in the first stitch, SC 1 in the next) x 12.  Join with a sl st to first stitch. CH 1 (24)
    Row 5: (SC in the first stitch, SCINC in the next) x 12.  Join with a sl st to the first st. CH 1. (36)
    Row 6: (SC in the first stitch, Bobble in the next stitch) x 18.  Join with a sl st to first stitch. CH 1. (36)
    Row 7: (SC 2, SCINC in the next stitch) x 12.  Join with a sl st to first stitch. CH 1(48)
    Row 8: (SC in the first stitch, Bobble in the next stitch) x 12. Join with a sl st to first stitch. CH 1. (48)
    Row 9: SC in each stitch around. (48)
    FO and weave in ends.

    Image of The Bobblelicious Bag against an aged fence.

    If you would like to support my blog, you can do so by doing your regular shopping on Amazon. As an Amazon affiliate, I earn a small commission on qualifying purchases made through my Amazon link, which in turn helps to support the blog so I can keep bringing you patterns and great content like this for free.

    Lining Your Bobblelicious Bag

    Fold the fabric you will be lining your bag with, in half so you can cut two circles at the same time. Lay one of your bag panels on top of the fabric and trace a line around the circle to get an approximate size for your lining. Cut your fabric (through both layers) on the line you just drew.  You should now have two fabric circles. Repeat these steps again on your interfacing so you have a total of 2 fabric circles and 2 interfacing circles. 

    Using your iron, fuse one of your fabric circles to each of your interfacing circles.  This means you’ll have two interfacing circles with fabric on them.

    Place your interfacing circles (fabric side facing the wrong side of your panel so that if there are holes in your panel, the coloured fabric will show through) on the back of each of your panels.  If your circles are too big to fit inside the panel without stretching it, trim the circles down until they fit snuggly inside each panel.

    Once you’re confident with the fit, of your interfacing circles, lay one of your interfacing circles on top of the fabric that has been folded in half and trace a line around the circle to get an approximate size for your lining. Cut your fabric (through both layers) on the line you just drew.  You should now have 2 interfacing circles (fused with fabric) and 2 fabric circles.

    Measure the width of your bag and add 1” for seam allowances.  Measure the circumference (around the outside) of your bag and subtract 8 inches from that measurement (to leave space for your zipper).  Using these measurements, cut a strip from your fabric.

    Pin a fabric circle to each edge of the long strip you just cut, leaving a 1/2” seam allowance.  Sew around the edge of each circle to seam it to the strip, stopping at the end of the strip.  This is honestly probably the most time-consuming part so take your time.

    Adding the Zipper

    Cut a 9.5” – 10” long x 4” wide piece of fabric and cut it in half.  These pieces will be sewn onto either side of the zipper.  Fold the long edge of each strip a ¼” and iron it down to hold it in place.  Pin that edge to your zipper (with nice side of fabric facing up) ensuring that you leave enough for the zipper to move freely.  Repeat with the second strip. Sew the strips onto your zipper. 

    Close up of the zipper used in the Bobblelicious Bag Pattern.

    With the zipper facing up and the bag lining with the wrong side facing out, line up your zipper with the opening on your lining that was left for the zipper.  Pin together, leaving a ¼ to ½” seam allowance and sew together, around the entire piece.

    Assembly

    Place your interfusing panels inside each of your crocheted panels.  If your panels aren’t fitting snuggly you can tack them in place by hand sewing them with a coordinating thread to your crochet panel.  Place the two crochet panels together with right sides facing out.  Holding two long lengths of yarn together, whip stitch the two panels together, leaving an opening of at least 9.5” for the zipper.  You may want to wait until you are done sewing in your zipper before you weave in the ends from this so if you need a little extra wiggle room to get your zipper in, you’ll have some give in the seam because it isn’t finished. 

    Bobblelicious Bag by The Loopy Lamb 

Free Crochet Pattern for a beautiful bobble stitch purse.

    Place your lining (with the wrong side facing out) inside the purse and using a sewing thread and needle, hand sew the zipper to the opening of your bag.  Weave in your ends from your whip stitch seam. 

    Line up your triangle rings on each side of the bag, approximately 2.5” inches below the edges of your zipper.  Using a length of yarn, sew to your bag.  Attach your purse strap to the triangle rings.  If using a tassel, attach it to the zipper. 

    Viola!  You’re finished your Bobblelicious Bag!  I hope you enjoy 😊

    Disclaimer:

    Feel free to sell the item created by this pattern but please provide pattern credit back to me when posting online, and please provide a link to my Etsy Shop: www.etsy.com/ca/shop/theloopylamb.  Please do not resell, distribute, duplicate, or share this pattern in any printed or digital form, claiming this pattern as your own original design.  Please do not use my photos when selling your finished items.   

    I’d love to see your finished Bobblelicious Bag!  Please share your finished makes by tagging the pattern on Ravelry, sharing it to our Facebook page or Instagram.  Don’t forget to follow me on Facebook, Instagram and Pinterest 

    Facebook: www.facebook.com/TheLoopyLamb
    Instagram:
      www.instagram.com/TheLoopyLamb
    Pinterest: www.pinterest.com/theloopylamb
    Newsletter: Sign up for my newsletter!

    Like making crochet bags? Check out my free patterns for The Vendbar Tote (The Reversible Tote Bag), The Colour Block Makeup Bag or The Rainbow Saver Tote Bag.

    The Bobblelicious Bag is a free crochet pattern features chunky bobble stitches and a surprise pop of colour. The chain style strap gives it a professional touch that will make your friends wonder "where did she buy that bag?".  Check out the free crochet pattern for the Bobblelicious Baf from The Loopy Lamb

#bobblestitch #purse #bobblestitchbag #bag #crochetpattern #freecrochetpattern #freepattern #bobbleliciousbag #Crochetpurse #crochetbag