• Crochet Patterns

    Crochet Tartan Beanie Free Crochet Pattern

    Woman laughing wearing the Crochet Tartan Beanie
    This is an unsponsored post. All opinions are my own. This post may contain affiliate links.

    The Crochet Tartan Beanie is the 2nd pattern in my crochet tartan series. This hat was designed to match my Crochet Tartan Cowl pattern. The Crochet Tartan Beanie features a classically beautiful tartan pattern that is comprised of simple colour changes and stitches.

    The Crochet Tartan Beanie is made working in rows to create a rectangular piece of fabric. The vertical lines of the tartan pattern are then added using surface crochet stitches. Once the surface crochet is completed, the hat is seamed up and cinched closed on one end to create the beanie. Adding a pompom to finish it off, and you’re done your Crochet Tartan Beanie.

    Pin it for later Save.

    Close up of stitches on the Crochet Tartan Beanie with a wooden crochet hook on top

    New to Surface Crochet?

    As I mentioned, this beanie pattern uses surface crochet. If you’re unfamiliar with this technique, take a look at my post HERE to see my instructions and tips for working surface crochet stitches.

    Crochet Tartan Beanie Pattern

    Woman smiling wearing the crochet tartan beanie

    Skill Level: Intermediate

    Supplies:

    6.0 mm hook
    105 yards/96 m (1.83 oz/52 g) of Mary Maxim Woodlands in Stardust
    41 yards/38 m (0.71 oz/20 g) of Mary Maxim Woodlands in Cranberry
    41 yards/38 m (0.71 oz/20 g) of Mary Maxim Woodlands in Moss
    Faux fur pom pom (optional)
    Tapestry Needle
    Scissors

    Get an ad-free PDF version of this pattern HERE on Ravelry or HERE on Etsy.

    Abbreviations:

    CH = Chain
    ST = Stitch
    SL ST = Slip Stitch
    HDC = Half Double Crochet
    FO = Finish Off


    Finished size: Approximately 8.5” tall x 10.25” wide
    Size before seaming: 20.5” wide by 8.5” tall

    Gauge: 14 sts x 11.5 rows = 4 inches

    NOTES: You’ll be doing surface crochet stitches to create the vertical striping of the tartan. When doing the vertical striping, if you find that your fabric is losing a lot of stretch or bunching up, it means your slip stitches are too tight.  Make sure you keep your slip stitches loose.  Don’t hesitate to go up a hook size or two to keep your stitches from being too tight.

    Crochet Tartan Beanie Pattern 

    Row 1: FDHDC 72 or CH 73 and HDC in the 2nd CH from the hook and each remaining CH. Turn. (72 sts)
    Rows 2 – 3:  CH 2.  HDC in the first stitch and each stitch around.  Turn. (72 sts)
    Change to Cranberry
    Rows 4 – 5: CH 2.  HDC in the first stitch and each stitch around.  Turn. (72 sts)
    Change to Stardust
    Row 6:  CH 2.  HDC in the first stitch and each stitch around.  Turn. (72 sts)
    Change to Moss
    Rows 7 – 8: CH 2.  HDC in the first stitch and each stitch around.  Turn. (72 sts)

    If you would like to support my blog, you can do so by doing your regular shopping on Amazon. As an Amazon affiliate, I earn a small commission on qualifying purchases made through my Amazon link, which in turn helps to support the blog so I can keep bringing you patterns and great content like this for free.


    Change to Stardust
    Rows 9 – 14: CH 2.  HDC in the first stitch and each stitch around.  Turn. (72 sts)

    Crochet Tartan Beanie folded and lain flat, next to a wooden crochet hook and a coffee.


    Change to Cranberry
    Rows 15 – 16: CH 2.  HDC in the first stitch and each stitch around.  Turn. (72 sts)
    Change to Stardust
    Row 17:  CH 2.  HDC in the first stitch and each stitch around.  Turn. (72 sts)
    Change to Moss
    Rows 18 – 19: CH 2.  HDC in the first stitch and each stitch around.  Turn. (72 sts)
    Change to Stardust
    Rows 20 – 25: CH 2.  HDC in the first stitch and each stitch around.  Turn. (72 sts)

    Hat should measure approximately 8.5” in length.  If you want a slouchier hat, keep repeating rows 15 to 25 until you reach your desired length.  FO leaving a really long tail to seam up the hat.  Don’t seam up your hat yet. We’re going to add the vertical lines first.

    Adding the vertical stripes using surface crochet:

    Using Cranberry, make a slip knot.  Insert your hook into the bottom part of your sixth stitch in your starting chain of the cowl.  Inserting your hook from the right side to the wrong side, pull the slip knot through to the front of your project.  With your cowl facing you lengthwise (or whichever way you feel most comfortable doing surface slip stitches) and the right side facing you, slip stitch into the sixth stitch of every row for the entire length of your cowl.  FO.  Repeat these steps again, starting in the 15th, 24th, 33rd, 42nd, 51st, 60th and 69th stitch of each row. You will have 8 cranberry vertical lines.

    Crochet Tartan Beanie folded and lain flat with a wooden crochet hook on top. Two balls of Mary Maxim Woodlands yarn next to it.

    Using Moss, make a slip knot.   Insert your hook into the bottom part of your seventh stitch in your starting chain of the cowl.  Inserting your hook from the right side to the wrong side, pull the slip knot through to the front of your project.  With your cowl facing you lengthwise (or whichever way you feel most comfortable doing surface slip stitches), working right to left, slip stitch into the seventh stitch of every row for the entire length of your cowl.  FO.  Repeat these steps again, starting in the 16th, 25th, 34th, 43rd, 52nd, 61st and 70th stitch of each row.  You will have 8 moss vertical lines.

    FO and weave in ends.

    Finishing your hat:

    Fold your fabric in half lengthwise and line the ends of the rows up together.  Seam the ends together using the mattress stitch or your favourite seaming method.  FO and weave in end.

    Using the long tail you left after crocheting your hat, weave your tail through the last round of the hat.  Pull tightly and sew your hole shut.  If using a pom pom, secure your pom pom to your hat and weave in your ends.

    While you’re here, check out these other great free crochet patterns available on my site: Crochet Tartan Cowl (it matches this hat!), Norse Crochet Mittens, Juneau Blues Beanie, Catena Hat, The Aeipathy Beanie, Polar Puff Messy Bun Hat, Arctic Gem Beanie.

    Disclaimer:

    Feel free to sell the item created by this pattern but please provide pattern credit back to me when posting online, and please provide a link to my blog: www.theloopylamb.com.  Please do not resell, distribute, duplicate, or share this pattern in any printed or digital form, claiming this pattern as your own original design.  Please do not use my photos when selling your finished items.   

    I’d love to see your finished items!  Please share your finished makes by tagging the pattern on Ravelry, sharing it to our Facebook page or Instagram.  Don’t forget to follow me on Facebook, Instagram and Pinterest  Facebook: www.facebook.com/TheLoopyLamb
    Instagram:
      www.instagram.com/TheLoopyLamb
    Pinterest: www.pinterest.com/theloopylamb
    Newsletter: Sign up for my newsletter!

  • Crochet Patterns

    Crochet Tartan Cowl – Free Crochet Cowl Pattern

    Crochet Tartan Cowl which is grey with green and cranberry stripes being worn by a mannequin
    All opinions are my own. This page may contain affiliate links.

    The Crochet Tartan Cowl is a beautifully classic cowl made using simple colour changes and simple stitches. If you can crochet a chain, half double crochet and slip stitch, you can make this cowl. I can’t wait to see all of the colour combos everyone comes up with!

    The Crochet Tartan Cowl is made using three different colours of Mary Maxim’s Woodlands yarn. I’ve used the colours Moss, Cranberry and Stardust. This was my first time using Mary Maxim’s Woodlands yarn and it was love at first squish. This yarn is an acrylic/alpaca blend (90%/10%) and is delightfully soft and cozy. It does have a little bit of a halo (I suspect from the addition of the alpaca fibers) but doesn’t hinder visibility or diminish stitch definition. The colours are rich and beautiful. I mean, that cranberry yarn is so awesome, that I want to use it for everything right now. This is definitely a yarn that I want to keep handy in my stash.

    Pin it for later HERE.

    The Crochet Tartan Cowl measures approximately 10 inches wide by 35 inches long. The cowl fits closely to the neck and you fold the top edge down to create a sort of collar. If you prefer a looser fitting cowl, the pattern gives you intstructions for making the cowl any length you prefer. If you do alter the length of your cowl, please keep in mind that it will affect how much yarn you will require.

    close up of the buttons on the crochet plaid cowl.

    How to Surface Crochet

    To make the vertical striping on the Crochet Tartan Cowl, I used a technique called surface crochet. Surface crochet is a technique to add stitches to the surface of your project using slip stitches. This is a fairly simple technique that gives you a pretty chain along the top of your project. The wrong side of your project looks like it has little dashes instead of the chain.

    The two most important things to remember when doing surface crochet are:
    1. Make sure the right side of your project is facing you and,
    2. Don’t make your slip stitches too tight!

    I cannot stress #2 enough. If your slip stitches are too tight, it can warp your fabric and your fabric will lose it’s elasticity because the slip stitches will prevent the fabric from stretching. If you need to go up a hook size (or two) in order to help keep a loose tension on your slip stitches, don’t hesitate to do it. You may kick yourself later if you don’t.

    To do surface crochet, start with the right side of the fabric facing you:

    • Insert your hook into the stitch you want to start with from right side of the fabric to the wrong side. Put your slip knot onto your hook and pull from the wrong side of your fabric to the right side of your fabric. You will be holding the working yarn on the wrong side of the fabric as you do this
    • Insert your hook into the next stitch/or spot you are wanting to make your stitch in. Pull up a loop through your fabric and pull through the loop on your hook. 1 slip stitch created.
    • Repeat these steps until you are satisfied with your surface crochet and FO. I like to pull my tail to the back of my work and then weave my ends in.

    If you want to see a video tutorial on surface crochet to see it in action, check out this video by B.Hooked Crochet HERE.

    Plaid cowl pattern, free crochet pattern, button cowl pattern free

    Crochet Tartan Cowl

    Skill Level: Intermediate

    Supplies:

    6.0 mm hook
    188 yards/172 m (3.3 oz/94 g) of Mary Maxim Woodlands in Stardust
    68 yards/62 m (1.2 oz/34 g) of Mary Maxim Woodlands in Cranberry
    68 yards/62 m (1.2 oz/34 g) of Mary Maxim Woodlands in Moss
    3 – 1.5” Buttons
    Tapestry Needle
    Scissors

    Abbreviations:

    CH = Chain
    ST = Stitch
    SL ST = Slip Stitch
    SC = Single Crochet
    HDC = Half Double Crochet
    FO = Finish Off

    Get an ad-free PDF version of this pattern HERE on Ravelry or HERE on Etsy and help keep my patterns free.


    Finished size: Approximately 35” Long by 10” wide

    Gauge: 14 sts x 11.5 rows = 4 inches

    NOTES: You’ll be doing surface crochet stitches to create the vertical striping of the tartan. When doing the vertical striping, if you find that your fabric is losing a lot of stretch or bunching up, it means your slip stitches are too tight.  Make sure you keep your slip stitches loose.  Don’t hesitate to go up a hook size or two to keep your stitches from being too tight.

    Pattern

    Using Stardust, CH 35
    Row 1: HDC in 2nd CH from the hook and each st across. (34)
    Rows 2 – 4: CH 1 and turn. HDC in the first st and each st across. (34)
    Change to Cranberry
    Rows 5 – 6:  CH 1 and turn. HDC in the first st and each st across. (34)
    Change to Stardust
    Row 7: CH 1 and turn. HDC in the first st and each st across. (34)
    Change to Moss
    Rows 8 – 9: CH 1 and turn. HDC in the first st and each st across. (34)
    Change to Stardust
    Rows 10 – 15: CH 1 and turn. HDC in the first st and each st across. (34)
    Change to Cranberry
    Rows 16 – 17:  CH 1 and turn. HDC in the first st and each st across. (34)
    Change to Stardust
    Row 18: CH 1 and turn. HDC in the first st and each st across. (34)
    Change to Moss
    Rows 19 – 20: CH 1 and turn. HDC in the first st and each st across. (34)

    Girl wearing the Crochet Plaid Cowl, made in grey, red and green.

    If you would like to support my blog, you can do so by doing your regular shopping on Amazon. As an Amazon affiliate, I earn a small commission on qualifying purchases made through my Amazon link, which in turn helps to support the blog so I can keep bringing you patterns and great content like this for free.


    Rows 21 – 97: Repeat rows 10 – 20 7 more times. (34)
    If you want a longer cowl, keep repeating Rows 10 – 20 and return to Row 98 when ready to complete.
    Change to Stardust

    Row 98: CH 1 and turn. HDC in the first st and the next 3 sts.  CH 3, SK the next 3 sts, HDC in the next 8 sts, CH 3, SK 3 the next 3 sts, HDC in the next 9 sts, CH 3, SK the next 3 sts, HDC in the remaining 4 sts. (25 sts and 3 CH spaces)
    Row 99: CH 1 and turn.  HDC in the first st and the next 3 sts.  HDC 3 in the CH space, HDC in the next 8 sts, HDC 3 in the CH space, HDC 9, HDC 3 in the CH space, HDC in the remaining 4 sts. (34)
    Rows 100 – 101: CH 1 and turn. HDC in the first st and each st across. (34)
    FO and weave in ends.

    Adding the vertical stripes using surface crochet:
    Using Cranberry, make a slip knot.  Insert your hook into the bottom part of your third stitch in your starting chain of the cowl.  Inserting your hook from the right side to the wrong side, pull the slip knot through to the front of your project.  With your cowl facing you lengthwise (or whichever way you feel most comfortable doing surface slip stitches) and the right side facing you, slip stitch into the third stitch of every row for the entire length of your cowl.  FO.  Repeat these steps again, starting in the 12th stitch of each row, the 22nd stitch of each row and the 31st stitch of each row.

    Using Moss, make a slip knot.   Insert your hook into the bottom part of your fourth stitch in your starting chain of the cowl.  Inserting your hook from the right side to the wrong side, pull the slip knot through to the front of your project.  With your cowl facing you lengthwise (or whichever way you feel most comfortable doing surface slip stitches), working right to left, slip stitch into the fourth stitch of every row for the entire length of your cowl.  FO.  Repeat these steps again in the 13th stitch of each row, 23rd stitch of each row and the 32nd stitch of each row

    FO and weave in ends.

    Sew your buttons using a length of stardust yarn onto the long side of the cowl, on the end of the piece without the button holes  To get the right placement, I fold the two ends of the cowl down so they overlap each other (the end with the button holes on top).  Place the buttons on top of the buttonholes and sew into place.  I like to shift the end with the button holes down a little bit so that end of the cowl on the bottom lines up with the last line of surface stitches rather than the edge of the cowl so there’s less chance of the corner without a button creeping out on you.

    Fold the top edge down to form a collar

    Thanks for stopping by and checking out my pattern for the Crochet Tartan Cowl. Ready to make the matching The Crochet Tartan Beanie? If you like free crochet cowl patterns, check out the free patter for my Ava Cowl or my Super Quick Chunky Cowl.

    Disclaimer:

    Feel free to sell the item created by this pattern but please provide pattern credit back to me when posting online, and please provide a link to my Etsy Shop: www.etsy.com/ca/shop/theloopylamb.  Please do not resell, distribute, duplicate, or share this pattern in any printed or digital form, claiming this pattern as your own original design.  Please do not use my photos when selling your finished items.   

    I’d love to see your finished items!  Please share your finished makes by tagging the pattern on Ravelry, sharing it to our Facebook page or Instagram.  Don’t forget to follow me on Facebook, Instagram and Pinterest 

    Facebook: www.facebook.com/TheLoopyLamb
    Instagram:
      www.instagram.com/TheLoopyLamb
    Pinterest: www.pinterest.com/theloopylamb
    Newsletter: Sign up for my newsletter!

    The Crochet Tartan Cowl is a free crochet patterh for a beautifully classic cowl made using simple colour changes and simple stitches.  If you can crochet a chain, half double crochet and slip stitch, you can make this cowl.

#crochetpattern #freecrochet #buttoncowl #crochetcowl #crochetcowlpattern #plaidcowl #tartancowl